LPC2138FBD64/01,15 (NXP)

F1727704
нет данных
 
Микроконтроллер ARM, LPC Family LPC2000 Series Microcontrollers, ARM7TDMI, 32бита, 60 МГц, 512 КБ

Документация
Technical Data Sheet EN
CAD CadSoft_EAGLE EN

БрендNXP НаименованиеLPC2138FBD64/01,15 Цена заШтука Страна производстваGermany СкладFarnell

Микроконтроллер ARM, LPC Family LPC2000 Series Microcontrollers, ARM7TDMI, 32бита, 60 МГц, 512 КБ

The LPC2138FBD64 is a 16-/32-bit Microcontroller based on ARM7TDMI-S CPU with real-time emulation and embedded trace support. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 512kB embedded high speed flash, 32kB on-chip SRAM, 16-channel 10-bit A/D converter, 10-bit D/A converter, three 32-bit timers, PWM channels and 47 general-purpose I/O pins.
  • In-system programming/In-application programming (ISP/IAP)
  • EmbeddedICE RT and embedded trace interfaces
  • Two 32-bit Timers/external event counters, PWM unit and watchdog
  • Low power real-time clock with independent power and dedicated 32kHz clock input
  • Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 Kbit/s), SPI and SSP
  • Vectored interrupt controller with configurable priorities and vector addresses
  • Up to forty-seven 5V tolerant general purpose I/O pins
  • Up to nine edge or level sensitive external interrupt pins available
  • 60MHz Maximum CPU clock available from programmable on-chip PLL
  • On-chip integrated oscillator operates with external crystal in range of 1MHz to 30MHz
  • External oscillator up to 50MHz
  • Power saving modes include Idle and power-down
  • Individual enable/disable of peripheral functions as well as peripheral clock scaling down
  • Processor wake-up from Power-down mode via external interrupt or BOD
  • Single power supply chip with POR and BOD circuits
  • Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original LPC213x
  • Dedicated result registers for ADC(s) reduce interrupt overhead
  • UART0/1 include fractional baud rate generator, auto-bauding capabilities & handshake flow-control
  • Additional BOD control enables further reduction of power consumption

Области применения

Связь и Сеть, Аудио, Визуализация, Видео и Зрение, Промышленное, Автоматизация и Управление Процессами, Медицинское

Архитектура:
ARM7TDMI
Количество I/O:
47I/O
Количество Бит:
32бита
Количество Выводов:
64вывод(-ов)
Линейка Продукции:
LPC Family LPC2000 Series Microcontrollers
Максимальное Напряжение Питания:
3.6В
Минимальное Напряжение Питания:
Размер Памяти:
512КБ
Размер Памяти RAM:
32КБ
Семейство Микроконтроллера:
LPC
Серия Микроконтроллера:
LPC2000
Скорость ЦПУ:
60МГц
Соответствует Фталатам RoHS:
Да
Стиль Корпуса Микроконтроллера:
LQFP
Тип Встроенного Интерфейса:
SPI, UART
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
Популярные товары