T000020 (ARDUINO)

F2075356
нет данных
 
Дочерняя плата, Arduino TinkerKit модуль 2/3-осевого акселерометра, полная шкала ±3.5g

Документация
Technical Data Sheet EN

БрендARDUINO НаименованиеT000020 Страна производстваItaly СкладFarnell

Дочерняя плата, Arduino TinkerKit модуль 2/3-осевого акселерометра, полная шкала ±3.5g

The T000020 TinkerKit is based on the LIS344AL, a three axis accelerometer. You can get data about the third axis (referred to as Z) by soldering a header to the through hole labelled Z. On the back of the module you can find two signal amplifier and a green LED that signals that the module is correctly powered. This module outputs 0V to 5V on one of its two signal pins when its G force is changed (e.g. is moved). The value is approximately 2.5V when there is 0G on the X or Y axis. When you connect this module to the input on an Arduino using the TinkerKit shield, you can expect to read values between 0 to 1023 while moving the module. This module is a sensor. The connector is an output which must be connected to one of the input connectors on the TinkerKit shield.
  • ±3.5g full scale
  • Output voltage, offset and sensitivity are radiometric to the supply voltage
  • Factory trimmed device sensitivity and offset
  • Embedded self test
  • High shock survivability (10000g)

Области применения

Считывание и Контрольно-измерительная Аппаратура, Хобби и Образование, Потребительская Электроника, Робототехника

Архитектура Ядра:
-
Для Использования с:
Совместимыми с TinkerKit платами
Линейка Продукции:
-
Название Семейства Чипа:
-
Номер Ядра Чипа:
LIS344AL
Подархитектура Ядра:
-
Производитель Чипа:
STMicroelectronics
Содержимое Комплекта:
Оценочная плата для LIS344AL
SVHC (Особо Опасные Вещества):
To Be Advised
RoHS статус:
Да